background image

313RL1S  Should  be  used  as  part  of  an  employee  training
program  as  required  by  OSHA  and  is  intended  to  meet  the
manufacturers instructions as required by ANSI Z359.14-2014
CLASS B (SLE).

ANCHORAGE: 

The anchorage to which this product is attached

must  be  capable  of  sustaining  a  static  load  in  the  direction
applied by the personal fall arrest system of at least 3600 Ibs.
with certification of a qualified person, or 5000 Ibs. without
certification. When more than one personal fall arrest system
is attached to the same structure, the strength requirements
stated above must be multiplied by the number of personal
arrest systems attached to the structure.

PLAN 

your personal fall protection system before installing

and using this equipment. Consider all factors affecting your
safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN
OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

FREE FALL:

Ensure adequate clearance exists in your fall path

to prevent striking an object. When the safety retractable is
anchored above, a minimum of 4 ft. from the working level to
the  lower  level  or  nearest  obstruction  is  recommended,  if
anchored at foot level an additional 9 ft. clearance is needed
up to 310 lbs. Avoid working where your lifeline may cross or
tangle with that of another worker. Do not allow the lifeline to
pass under your arms or between your feet. Never clip, knot,
or otherwise prevent the lifeline from retracting.

WARNING!

This product is part of a personal fall arrest system. The user must
read  and  follow  the  manufacturers  instructions  for  each
component of the system. These instructions must be provided to
the user of this product. The user must read and understand these
instructions before using this product. Manufacturers instructions
must be followed for proper use and maintenance of this product.
Alteration  or  misuse  of  this  product,  or  failure  to  follow
instructions may result in serious injury or death.

WIDEST SHARP LEADING EDGE APPROVED PRODUCT LINE IN THE INDUSTRY!

Approved for 

SHARP LEADING EDGE

and foot level drops.

3rd party certified by an ISO 17025 accredited test

laboratory. Lengths up to 110’. 

313RL1S

USER INSTRUCTION MANUAL

DESCRIPTION:  

SAFETY RETRACTABLE LANYARDS MADE WITH WIRE 

ROPE / WEBBING. ALSO AVAILABLE 100% TIE-OFF

MODEL:  

M2-HPSY8Y, M2-HPSY8YCA, M2-HPSY8YABB, M2-HPSY8YCT 

M2-HNY10Y, M2-HNY10YCA, M2-HNY10YABB, M2-HNY10YCT, US-HPS8, 
US-HPS11, US-HPS20, US-HPS30, US-HPS40, US-HN10, US-HN15, US-HN20, 
US-HN30, US-HN40, US-HN60, US-HN80, US-H110, US-H150, US-H210

MEETS OSHA & ANSI Z359.14 CLASS B (SLE) 

1-800-850-5914

PHOENIX, AZ USA

WATCH VIDEOS 

1, 2, 8, 17, 26, 27, 28, 29 & 31 

ON ULTRASAFEUSA.COM

NEW

IMPROV

ED

SWIVEL

 

YOKE

FOR EXTRA

COMFORT

PROUDLY 

MANUFACTURED IN

RELIABILITY YOU

CAN COUNT ON!

GERMANY

Summary of Contents for M2-HPSY8Y













Reviews: