ULTRA REEF
www.ultrareef.it
4
INSTRUCTION MANUAL
English
This manual contains a quick guide to the main
functions of the PSK-SDC pump.
This manual does not replace the original Syncra SDC
and PSK SDC instruction manual made by Sicce and
included in the supply.
If you intend to use Wi-Fi function, refer to the Syncra
SDC and PSK SDC instruction manual made by Sicce and
included in the supply.
Warning: For the correct and complete functioning of
the skimmer, the Wi-Fi function is not mandatory.
Using this feature may require computer skills, so is not
advisable its use by inexperienced users
Warning: For assistance on installation and use of Wi-Fi
or the app, contact the company Sicce through the
contacts listed on the web site www.sicce.com
UPDATE
Until 2020 the UKS-PSK pumps were fitted under the
pump a black gasket. From 2021 the new pump base
does NOT use the black gasket.
When replacing the old pump, install the new one
without inserting the black gasket.
Do not insert shims or homemade gaskets under the
pump.
PUMPS WITH CONTROLLER
Adjusting of the pump allows you to change the
performance of the skimmer by simultaneously adjust
the amount of aspirated air and treated water.
Attention: Set the speed to 50% at the first start and
wait 24 hours before further adjustments.
Reducing the pump speed decreases the extraction
capacity and the consumption of the skimmer. This
solution is useful for feeding or tanks maturation time.
Conversely, increasing the speed of the pump increases
the extraction capacity and the consumption of the
skimmer.
After each variation of speed, it is necessary to wait for
the foam to stabilize.
Change the speed of one step
(one LED) every 2 hours.
