Ultra Power UP6, Instruction Manual, Page: 5 / 20

WARNINGS AND SAFETY NOTES
3
ALWAYS fully read all warnings and instructions on both charger
and battery prior to use. Be aware of battery safety warnings. Make
sure that all charging parameters are correctly setup prior to
charging any battery. INCORRECT SETTINGS MAY CAUSE FIRE,
PROPERTY DAMAGE AND/OR PERSONAL INJURY!
ALWAYS press the roller wheel to terminate charge completely
when battery is fully charged, and return to the standby screen on
the LCD display.
NEVER leave the battery or charger unattended while in use. In
case of any malfunction, immediately discontinue use and refer to
this manual for troubleshooting ideas.
ALWAYS keep your charger away from dust, dirt, moisture, rain, and
high temperature. Avoid leaving your charger or battery in direct
sunlight or exposing them to intense vibration or shock.
ALWAYS make certain to observe proper input and output polarity.
The UP6 operates safely with input voltage between AC 100-240V
DC 9-32V.
ALWAYS place the charger on a heat-resistant, non-flammable
surface when in use. Keep flammable materials away from charger
when in use.
NEVER use the charger while placed on automobile seats,
carpeting, or other flammable materials.
ALWAYS make sure that the vent holes on the bottom of the charger
are unobstructed and the cooling fan in operation.