3. Grip the extension handle firmly with
your left hand and the main handle
with your right to counter balance the
Ultra Lift while PULLING the
control switch to raise the load to the
truck bed. When the load is just
above truck bed level, roll the Ultra
Lift back into the truck and set the
load down.
4. Your Ultra Lift has a vertical lifting
capability of 36”. Any truck with a
bed height of 36” or less can be
loaded in one step. Higher trucks,
such as over-the-road trailers, can be
reached in two steps by placing a
platform or box behind the truck and
moving the load from ground level to
the box and then to the truck bed.
B. UNLOADING A TRUCK
Unloading requires a reverse of the loading procedure. Start with the wheels
approximately 4” from the edge of the truck bed and let the wheels roll slightly
forward as the load approaches the ground.
NOTE: For some loads it will be necessary to drop the
leverage bar and apply foot pressure for extra
counterbalance force as you raise or lower the load.
Loads that are heavier may require additional tie
down assistance for counterbalance.
-8-
Summary of Contents for 1500
Page 28: ... ii ...
