UF15000
UF15003
UF15005
Installation/Installation/Instalación
Revised 6-2018
Revised 6-2018
Press the button of the quick connector
and connect it with the hose.
5
3
Install washer, gasket and mounting nuts
onto the shank to cover the mounting
hole.
Tighten the mounting nut.
Remove the quick connector.
1
Install the faucet through the mounting
hole.
2
7a
Turn on the handle and press the spray
head button into the position shown by
the arrow to check the operation. This
position is for stream function.
Use supply hoses (not included) to
connect the cold and hot copper inlets
to angle valves. Use wrench to tighten
the coupling nuts.
Turn on water supplies and check all
connections for leaks.
6
Press the spray head button into the
other position as shown by the arrow
to check for the operation. This
position is for the spray function.
7b
Fasten the weight to the retractable
hose with screws, and then install the
quick connector on the outlet pipe.
4
