Copyright © Ultra Electronics – USSI, Columbia City, IN 46725 USA
98028A-MAN-MASERIES Rev B
Page 3
HyperSpike
®
MA-1 and MA-2 Installation and Mounting Manual
This equipment is suitable for indoor or outdoor wet location use in Class I Division 2, Groups A, B,
C, D; or Non-Hazardous locations only.
Temperature Code: T3A
CAUTION: SOUND LEVEL EXCEEDS 120 dBA.
2.0 MOUNTING
WARNING: WHEN MOUNTING OUTDOORS, MAKE SURE THAT THE SUPPORT
SYSTEM USED HAS THE PROPER WIND LOAD RATING AND COMPLIES WITH
LOCAL STANDARDS AND CODES.
The MA-series comes standard with a mounting adaptor that accepts a 2” diameter pole and has
2 – 3/8 set screws to lock the unit in place. (Figure 1)
1) To mount the MA-1/MA-2, slide the mount on the emitter head over a 2” OD pipe
(not included).
Figure 1: Location of the 2” ID mount