5
GB/IE/NI
Technical specifications / Cleaning
Fill the new oil filter 2/3 full with fresh
oil and lubricate the rubber seal a little�
Lubricating the seal makes it easier to
remove at a later stage and stops the seal
from being damaged when it is being
tightened�
Screw the oil filter on by hand and then
tighten it with the oil filter wrench�
Important:
It is essential that you
observe the relevant instructions in the
operating instructions for your car�
After the engine oil has been drained
and the screw plug has been refitted,
then you can change the oil filter�
Put the oil filter wrench over the oil filter
and fix it in place by rotating the adjusting
screw�
Loosen the oil filter with the oil filter
wrench and rotate it out completely by
hand�
Attention:
In the filter area and filter
there will be residual oil which will run out�
It is essential that you put an oil collection tray
underneath�
Never allow fresh or old oil to flow into
the floor or sewer system� This is illegal!
Collect old oil in a suitable container in
order to protect the environment� Dispose
of it at your local collection point, petrol
station or oil dealer�
z
Cleaning
Clean the product with a soft moistened
cloth� Do not use any aggressive or abrasive
detergents�