Issue: 3 / 310317
Page
19
of
22
On completion of the service, always test the wheelchair
before the engineer leaves, and make
sure you are satisfied with the work carried out.
9.1 Regular inspection checklist
The following table shows the regular inspections that must be performed to ensure the safe and
efficient continued use of the wheelchair:
On
Delivery
Weekly
Monthly
General
•
Does the wheelchair move in a straight line?
Manual Brakes
•
Does the manual brake touch the tyre whilst moving?
•
Are the brakes easy to operate?
Frame Work
•
Examine and check frame work is not worn or bent
Side Skirts / Armrests
•
Check that all fixings are in position and tightened
Arm Pads / Foam
•
Check armrests for any damage or loose screws
Seat and Back Upholstery
•
Check the general condition
Castors
•
Check the axle to ensure that it’s correctly tightened, by
turning the castor. The castor should have no resistance
and stop gradually.
Fork / Tube
•
Check all the fittings are in place
Tyres
•
Check the solid tyres have no damage and have a smooth
running surface