8 |
P a g e
Practice
Please practice with your drone for at least 4 battery flights before fishing and
complete the
flight log sheet
. Total flying hours are automatically recorded on the flight control system.
Do not change parameters without knowing what they will do. Use caution when using the
phone APP so as not to upload incorrect parameters.
It has been shown that users who look after their drone, clean it regularly and do the
required checks, will have a very successful experience. Drones are not 100% reliable. Not
any type. Users are encouraged to UP-SKILL by learning to pilot the craft in NON-GPS mode
like ALT hold mode.
NOTE : We suggest a flying altitude of 25M. When Flying the bait out, the drone can lose
some altitude and then level off. Please use the left stick and push it up to add power and
assist the drone to maintain altitude. DO NOT fly out a bait at excessive speed.
Maintenance
Drones require regular on-board electronic maintenance and frame and motor care.
1.
Accelerometer and GYRO calibration can be done wirelessly from the phone APP.
This feature means that you do not need to connect to a PC to perform this
maintenance. 6 Axis ACC calibration should be done at least every 4-8 weeks for
regular drone users, or if any warning messages are received from APP.
See video 6
–
Wireless ACC calibration
2.
Compass calibration should be done when changing locations by 60km or if you
notice that the drone is hovering in a circle, (Toilet Bowl)
3.
Corrosion treatment. Use WD40 or other good anti-corrosion spray (plastic friendly
type) on the motors.
4.
Blow motors out with compressed air if sand is ingested.
5.
Treat all battery terminals, switch and on drone with anti-corrosion spray.
Summary of Contents for CUTA-COPTER EX-1 6S
Page 1: ...1 P a g e EX 1 Super Fishing Drone ...
Page 21: ...FLY MAINTAIN FLY AGAIN ...
Page 22: ......
