Ultenic T10, User Manual, Page: 29 / 32

Specifications
Dimensions
φ350mmxφ350mmx98mm
Product weight ≈3.6kg
Rated voltage
14.4V
Rated power
50W
Battery capacity 5200mAh
Robot
Auto Empty Base
Dimensions
282mmx361mmx202mm
Product weight
≈3.82kg
Rated voltage
1050W
Input Rating 100-240V ~50/60Hz
Output Rating
DC24V 1.2A
Dust Cover
Filter
Dust Duct and Filter
If the Auto Empty Base indicator light “ ” flashes or the r “ ” is solid green, and the dust bag is
not full, it is time to clean the filter and dust duct.
Use a Philips screwdriver to unscrew
the side brush screw and remove the
side brush.2Remove dirt and debris
and reinstall using Philips screwdriver.
Open the exhaust at the rear of the Auto
Empty Base, clean the filter, and
reinstall.
Fan Filter Support
Check if the fan filter support is contaminat-
ed by any debris and clean it with a dry cloth.
It is recommended to clean it at least once a
month.
IR Lens and Charging/Dust Collecting Con-
tacts
Check if the IR Lens and the Charging/Dust
Collecting Contacts are contaminated and
clean it with a dry cloth. It is recommended to
clean it at least once a month.
Fan filter
suppor
IR lens
Charging/Dust
Collecting Contacts