Ultenic D5 Series, User Manual

Page: 12 / 133

When you select spot cleaning, robot intensely cleans a localized area by
spiraling outward about 3 feet (1 meter) in diameter and then spiraling inward to
where it started. During spot cleaning, robot boosts vacuum power to ensure the
best cleaning performance for what you need. To use spot cleaning, place robot
on top of the localized debris and press “ ” (Spot) on the remote control.
Spot Cleaning
Power levels
Warm Tips:
During the recharging process, there may be a phenomenon that the charging
dock cannot be found. At this time, the robot will flash red light and "BEEP" four
times. Please manually put the robot onto the charging dock to charge.
Auto Cleaning
How Robot Clean Your Home
Press the “ ” button on robot or press the “ ” button on remote control to
start auto cleaning.
If the battery is low while the cleaning is not finished, the robot will return to the
charging dock for charging.
· When the robot vacuum cleaner is in sweeping mode, press this button to
adjust the suction power;
· When the robot vacuum cleaner is in sweeping and mopping simultaneous
mode, press this button to adjust the suction power;
· When the robot vacuum cleaner is in mopping mode, press this button to
adjust the speed of the water output.