Page 24
Operation
LAS 260.1
– Date 07/2023
NOTICE
During initial commissioning, set the suction power to 100% at
the potentiometer, fully open all intake openings, and run the
unit for approx. 2 minutes.
If the LED status ring flashes
red
after initial commissioning,
then you should check whether the filter is correctly seated.
Afterwards you can carry on working normally with individual
suction power settings.
LED status ring
The LED status ring indicates the status of the unit and the
condition of the particulate filters.
A detailed listing of the possible signaling states can be found
in the section “LED status messages.”
Color code
Description
White
Standby mode
(only applies during remote
operation)
Green
No errors
Orange
Warnings
Red
Critical messages
Summary of Contents for LAS260.1
