2.1.
Electrical safety
a)
The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b)
Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges, or moving parts. Damaged or tangled cords increase the risk
of electric shock.
e)
If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect it to electrical mains. Using an RCD reduces
the risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or the device itself in
water or other liquid. Do not use the appliance on wet surfaces.
2.2.
Safety in the workplace
a)
Keep the work area tidy and well-lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing, and use common sense
when using the unit.
b)
Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust. The unit produces sparks that can ignite dust
or fumes.
c)
If you find any damage or irregularities in the operation of the unit,
immediately turn it off and report it to an authorized person.
d)
If you have any doubts as to whether the product is working properly or if it is
damaged, contact the manufacturer's service department.
e)
Repairs to the device may only be carried out by the manufacturer's service.
Do not attempt to repair the product on your own!
f)
In the event of a fire or fire, use only powder or snow (CO2) fire extinguishers
to extinguish the live device.
g)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
Summary of Contents for EASY FLOORCLEAN V10
Page 62: ......
