Installation Manual
UL
POWER
UL350i UL350i
F
UL350i
S
UL 350i
HPS
350i
SA
MI 350A01 Revision No: 7
Date:
2014-09-15
Page:
17
of
60
Engine suspension and position
The UL260 engine has 4 mounting points situated at the back of the engine. 8 Rubber Mounts
are provided with the engine; to be assembled on both sides of the 4 holes.
The design of the engine mount must take into account the structural loadings, while ending with 4
pins to accommodate the rubber mounts. These should be tightened together with a M8x70 cap
screw (8.8 steel/Din 912) and lock nut between two flanges with the correct pretension (45mm
distance)(Torque to 25Nm). We suggest the steel Engine Mount Pin (1) and aluminium Engine Mount
Washer (2) to be dimensioned as below. This two parts are available as an option from ULPower if
needed.
(2)
(1)
Summary of Contents for UL35Oi
Page 2: ......
