48
HYDRAULIC WINDSHIELD SYSTEM HWS
STEP
DESCRIPTION
DRAWING
12
Continue with the climbing process until the set is fully lifted.
Make sure that the HWS set is properly resting onto the
“Pawl” of the “
Head LT HWS”
on its NEW working level.
Ones the HWS set is lifted:
Recover the “Anchors” of lower level.
Replace the “hydraulic system” to the next HWS set to be
lifted.
The lifting process is the same in case of “Crane lifting”,. The only diference is that the lifting force is made by
crane in stead of using the “H¡ydraulic Elevation System”.