4
Microscope Installation
To install the microscope, first use a screwdriver to unscrew the upper screw of external
expansion port. Align the
microscope’s
connector with the external expansion port and
tighten the screw above. After that, you can use the microscope.
After you uninstall the microscope, you can choose to use the screwdriver to tighten the
previously removed screw or not (the screw hole is waterproof).
Notes
•
When you first use the microscope, it may need some time to initialize it, please
follow the prompts step by step.
•
Remove the dust cover on the top before using the microscope.
•
Do not pull out the microphone while using it, or an error might occur.
•
The connector of the microphone is not waterproof, please do not put the
connector into water.
•
Caution: Do not use for medical purposes!
•
The external expansion port and the USB port cannot work simultaneously.
Microscope Use
Open the uSmart Camera app, tap the icon at the top right corner, and then you can
choose the languages according to your needs. Next, find icon on the home screen
and enter the app. You can set resolution using the
icon. Use shutter to take a photo
or tap the camcorder icon to start or stop recording.
Tap the white toolbar on the bottom of the screen to adjust the image. Tap to view
your recorded photos or videos. Tap to view the recorded photos/videos and the
shooting image simultaneously. You can slide the gear on the cable to adjust the LED
brightness.
Short pressing the shutter button takes a picture, and long pressing the button records
videos. Press the ZOOM button to zoom in 1.3times, 2times, or 3times. You can rotate
the focusing tube to adjust the focal length, which is ranged from 25X to 50X.
