3
ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
Important Notes to the Installer
1. Read all instructions contained in these installation
instructions before installing the cooktop.
2. Remove all packing material before connecting the
electrical supply to the cooktop.
3. Observe all governing codes and ordinances.
4. Be sure to leave these instructions with the consumer.
Important Note to the Consumer
Keep these instructions with your Use and Care Guide for
future reference.
IMPORTANT SAFETY
INSTRUCTIONS
•
Be sure your
c
ooktop is installed and grounded
properly by a qualifi ed installer or servi
c
e
te
c
hni
c
ian.
•
These
c
ooktops must be ele
c
tri
c
ally grounded in
a
cc
ordan
c
e with lo
c
al
c
odes or, in their absen
c
e,
with the National Ele
c
tri
c
al Code ANSI/NFPA No.
70—latest edition in the United States.
WARNING
The ele
c
tri
c
al power to the
c
ooktop
must be shut off while line
c
onne
c
tions are being
made. Failure to do so
c
ould result in serious injury
or death.
Provide Ele
c
tri
c
al Conne
c
tion
Install the junction box under the cabinet and run
120/240 or 120/208 Volt, AC wire from the main
circuit panel. NOTE: DO NOT connect the wire to the
circuit panel at this time. Wait until all wires have been
connected in the junction box.
Ele
c
tri
c
al Requirements
Observe all governing
c
odes and lo
c
al ordinan
c
es.
1. A 3-wire or 4-wire single phase 120/240 or 120/208
Volt, 60 Hz AC only electrical supply is required on a
separate circuit fused on both sides of the line (time-
delay fuse or circuit breaker is recommended, 30A).
DO NOT fuse neutral.
NOTE:
Wire sizes and connections must conform with
the fuse size and rating of the appliance in accordance
with the National Electrical Code ANSI/NFPA No. 70–
latest edition and local local codes and ordinances.
WARNING
An extension
c
ord must not be used
with this applian
c
e. Su
c
h use may result in a fi re,
ele
c
tri
c
al sho
c
k, or other personal injury.
2. The appliance should be connected to the fused
disconnect (or circuit breaker) box through fl exible
armored or nonmetallic sheathed cable. The fl exible
armored cable extending from this appliance should
be connected directly to the grounded junction box.
The junction box should be located as shown in
Figure 3 with as much slack as possible remaining in
the cable between the box and the appliance, so it
can be moved if servicing is ever necessary.
3. A suitable strain relief must be provided to attach
the fl exible armored cable to the junction box.
Unpa
c
king Instru
c
tions
1. Unpack and visually inspect the cooktop
2. Be sure the bottle of cleaner conditioner packed
in the hardware bag is left where the user can
fi nd it easily. It is important that the ceramic-glass
smoothtop be pretreated before use see
Cooktop
Cleaning and Maintenan
c
e
section in the
Use and
Care
G
uide
.
Model and Serial Number Lo
c
ation
The serial plate is located under the cooktop.
When ordering parts for or making inquires about your
cooktop, always be sure to include the model and serial
numbers from the serial plate on your cooktop.
Figure 3
