VERSION 1.0 2017/5/24
Page 11 of 13
￭
Two ways of charging. Turning off charging, 1.2A charging electricity, 4 hours get to full. On boot
charging, 500mA charging electricity.(this way can protect the circuit board and battery life) so fast
charging can choose Turning off charging, slow charging can choose On boot charging.
￭
After no use in long time, please charge it full at first before use it again. Please don’t open and repair
the camera by unauthorized organization.
￭
Please use a pin to press the reset key
to reboot the camera, when running hang or abnormal.
￭
Please get the camera bottom from water, to avoid short circuit during using.
●
4G Live Stream Function
￭
Open the cover on AV IN/AV Out port, and insert an activated SIM card.
￭
Long press the Power button to power on the camera.
￭
Press the Menu button to select 4G on/WIFI off, afterwards choose the selection of “reboot”. After the
reboot, please power on the camera again.
￭
After powering on the camera, it needs 15 seconds to connecting with 4G signal. When connecting 4G
successfully, there is 4G LOGO in WHITE in the left side of the LCD.
￭
Short press the Star key, the 4G LOGO becomes to green, which means that the camera starts to send
live streaming video to the Server. Press the Star Key again, the camera stops to send live streaming
video.
●
WiFi Live Stream function
￭
Connect the camera and the PC by USB and open the file of “WiFi.conf” by Microsoft's Notepad in MISC
folder. The Default setting is “ESSID=Cammpro-NETGEAR, PASSWORD=cammpro8525$”, please
revise them to your SSID (WiFi name) and password. In the file
“live.cfg”,rtmp://47.91.78.22:1935/live/000000 is the server IP address. The last six number is police ID,
please don't revise those information freely if you are not an engineering technician.
￭
Press the Menu button to select 4G off/WiFi on, afterwards choose the selection of “reboot”. After the
reboot, please power on the camera again.
￭
After powering on the camera, it needs 15 seconds to connecting with WiFi signal. When connecting WiFi
successfully, there is WiFi LOGO in WHITE in the left side of the LCD.
￭
Short press the Star key , the WiFi LOGO becomes to green, which means that the camera starts to send
live streaming video to the Server.
￭
Press the Star Key again, the camera stops to send live streaming video.
●
Tips
￭
Don't insert or remove the SIM card when camera's on.
￭
If the camera can't find 4G or WiFi signal, the 4G/wifi logo won't be showed on the screen.
￭
After turning on the camera, it will automatic search signal immediately, then all buttons will be locked. So,
don't do anything for the camera by that time.
￭
To avoid the noise, please keep the camera far away from the live stream computer.
