17
Follow the below steps to start “Beat to Music” mode after setup
and lighting in “Fire Only” mode (page 14-15).
AFTER FIRE PIT IS LIT:
WARNING:
Sudden flame height and regular intensity
changes occur when “Beat to Music” mode is engaged. Once
audio device is connected, stay clear of burner area before
playing audio clip.
1. Push the “Beat to Music” button. Button will glow orange when
ON. [Figure 12]
2. Turn gas control knob to the “Beat to Music” icon. When the two
icons are matched, “Beat to Music” mode will be engaged and
the flame will drop down to a lower height. [Figure 13]
3. After Bluetooth® connection is made (page16), stand clear
of fire pit and play your audio. Observe the fire reacting to the
sound.
4. Control the sensitivity of the fire show by turning the volume up
or down on your phone or media device being used.
* Higher volume produces a more reactive fire show.
* Lower volumes produce a less reactive fire show.
Fire show may vary from song to song, genre or fidelity of audio
clip. “Beat to Music” works with any audio including music, audio
books, pod-casts and stories.
5. Use the volume control knob on the unit to adjust speaker
volume up or down.
POWER DOWN “BEAT TO MUSIC”:
1. Turn off the “Beat to Music” button.
2. Turn gas control knob to OFF or to “Fire Only” mode.
[Figure 12] - Beat to Music power button.
[Figure 13] - Beat to Music (BTM) gas control
knob setting.
BEAT TO MUSIC OPERATION
