3) The Smart Segboard Protection Function
During use of the smart Segboard, users are prompted of any issues
with the Segboard by way of the indication symbol appearing red next
to the battery light.
The following issues will cause a red light to appear on the Segboard
or the Segboard will make an alarm sound.
-
The battery voltage is too low
-
During charging
-
When the maximum speed reached
-
When the battery is low
-
The smart Segboard rocking back and forth for more them 30
seconds continuously
-
When tyres are locked
-
When the battery voltage is lower than the protection value.
-
Continued maximum current discharge, such as attempting to use
above the permitted slope and the maximum speed
simultaneously
WARNING!
If there is a problem with the Segboard, it will automatically lock and
will require you to manually unlock it.
Once the battery is completely discharged you are advised to safely
park the board immediately and do not continue its use as the lack of
power will result in the inability to keep the board stable, and thus
increase the risk of injury.
Continued use of the board when the battery is at minimum charge,
will affect the life of the battery and may also result in destabilising the
board and cause injury.
If the battery light appears red, then you will need to stop using
the Segboard and then recharge the Segboard to eliminate it to
cut off whilst you ride it, as this may cause serious injury.
