Assembly
21
c
Step 11 Mount the dust shield (J) through the ‘T’ bolts (d),
place a flat washer (i) over the bolts and secure using two
locking knobs (b), see figs 44-45.
Fig 44-45
i
i
J
Mitre Fence Assembly
Step 1 Locate the mitre fence(10) and extension (11),
Note: the bag of fixings will be tucked inside the extension
assembly. Slide the two Hex bolts into the extension ‘T’
slot. Insert the Hex bolt down into the machined slots in
the mitre fence and secure the assembly with the two
wing nuts, see fig 46. DO NOT OVERTIGHTEN!
Fig 46-47
10
11
Mitre fence
extension
Hex bolt/washer
Wing nut
Tool Storage Holders
To store your tools when not in use, place the mitre fence
assembly into the mitre fence bracket (1), hook the insert
plate spanner over one of the two Phillips screw hangers
and Insert the shaft of the winding handle from UJK router
elevator, (code 502701) through the pre-drilled hole in the
tool bracket (2), see fig 48.
Fig 48
Mitre fence
Insert plate spanner
Winding
handle
