Feature Locator :
:
Installation Hints :
:
1.
First time when WAC-110 into the power plug., please wait 3~5 minute let the battery of
WAC-110 charge in advance.
2. Linking way with WR-110 needs to press set button of side of WAC-110.
Continuing
press set
button of
bottom of WR-110. Wait for 30sec. to 1 minute. If linking success indicator light
of LED will flash three times. If linking fail, indicator light of LED will flash two times.
3. WCC-110 can control WAC-110 that send out the sound of alarm or stop. Please reference the
user manual of WCC-110 when setting.
4.
If pull out power adapter from the plug of WAC-110 (Wireless alarm controller),
WAC-110 will dispatch wireless alarm which send out the sound of alarm six times and
red LED
will flash.
5.
WAC-110 (Wireless alarm controller) sends out the sound of alarm.
High luminance LED
red light will flash. IF stops the sound please press
transparent button of front panel.
Troubleshooting:
1.
Problem
:
When link with WR-110 (Wireless repeater), there is no display of LED
Indicator light for WAC-110 (Wireless alarm controller) to flash two or
three times.
Solution
: a.
Be able to use small night light to confirm the plug power valid.
b.
Internal golden electric capacity electric power of WAC-110 may be not
full. Insert to power plug then wait about 10 minutes, and then pull out
from the power plug for test. If capacity is full
WAC-110 (Wireless alarm
controller)
will send out the sound six times.
c.
May be not press set button, need to link with repeater again.
d.
If the above handles are invalid, please contact with
agency.
1. State of LED window
2.
Button and red LED
3.
Alarm voice hole
4. (SET) Setting button
5.
America power plug
