EN - English - I
nstruc
tions manual
6
6.1.5 Brackets and adaptors
The product cannot be fixed to a bracket or adaptor.
For further information refer to the product's
technical data sheet or directly contact VIDEOTEC.
6.1.6 Installation of the version with
double filter for air renewal
Special attention must be paid to the position of the
air intake filter fins when installing the housing.
Fig.
4
Depending on the inclination of the housing, the
direction of the fins must be such to prevent water
entering in case of rain.
To guarantee the IP44 weatherproof, install the
housing on the support following the inclination
limits as shown in the picture.
0˚
45°
45°
Fig.
5
Maximal rotation on the transversal axis: 0°.
Maximal inclination on the longitudinal axis: +/- 45˚.
6.1.7 Ethernet cable installation
Fit the gasket (01) to the cable gland M20 (02).
Fasten the cable gland to the bottom of the housing
(03) using the M20 nut (04).
Pay attention to the fixing. Tightening
torque: 7Nm.
Pass the cable with connector RJ45 (05) through the
upper part of M20 cable gland (06).
01
02
03
06
05
04
Fig.
6
Choose the gasket and then put it on the cable.
Fig.
7
Cable diameter from 3.5mm (0.1in) to 5.5mm (0.2in).
Fig.
8
Cable diameter from 5.5mm (0.2in) to 7.5mm (0.3in).
Fig.
9
