MSR213U Programmer’s Manual
PM072 Rev. A
7-9
Bytes 129~137(3*3)
TK2 Block Output function A
TK2 Block Output function B
TK2 Block Output function C
Bytes 138~146(3*3)
TK3 Block Output function A
TK3 Block Output function B
TK3 Block Output function C
Block Output format:
Card type 1byte(refer to section 5
Card Encode Type
description)
Start char 1byte
End char 1byte
Note:
If both Start and End set to 00h this function will be disabled.
Bytes 147~148(2*1)
Replace the default Error indicator("E", 45h) with specified character.
Note:
00h means default value is used.
Bytes 151~152(2*1)
Bytes 153~154(2*1)
Bytes 155~156(2*1)
Bytes 157~158(2*1)
Bytes 161~162(2*1)
Bytes 163~164(2*1)
Bytes 165~166(2*1)
Bytes 167~168(2*1)
Bytes 169~170(2*1)
Bytes 171~172(2*1)
Bytes 173~174(2*1)
Bytes 175~176(2*1)
Use these functions to program the SS character you wish to use for Track1/2/3 of a specific
card. If value=00h the original Start Sentinel is used instead.
Byte 180
Checksum for Keyboard memory map, XOR byte 1 to byte 7.
Byte 201
Same as
