UI N-SW, Quick Start Manual

Page: 13 / 15

Specifications
N­SW
Dimensions
(Excluding Mount) 196.4 x 93.5 x 32.4 mm
( 7.73 x 3.68 x 1.28")
Weight 271 g
(9.6 oz)
Enclosure Characteristics White Polycarbonate
Total Non­Blocking Line Rate 4 Gbps
Typical Power Consumption 1.5W
Max. Power Consumption 30W
Power Method 24V, 2­Pair Passive PoE
Networking Interfaces (4) 10/100/1000 Mbps Ethernet RJ45
Total Passive PoE Max Wattage 24V, 2­Pair, 1A for 3 Ports (30W)
Passive PoE Max Wattage per
Port 24V, 2­Pair, 1A per Port (24W)
Passive PoE Voltage Range 21.6 ­ 30V
ESD/EMP Protection ± 24kV Air, ± 24kV Contact
Operating Temperature ­30 to 70° C
(­22 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer’s label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire hazard if
the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided