uhlmann & zacher CX6192, Operating And Assembly Manual, Page: 13 / 25

CX6192 P
RODUCT DESCRIPTION
12
3.5.4 CX6520 Programming station
The programming station is an optional addition to the Keyvi management
software and the CX6510 service device in order to conveniently program the
key. In conjunction with MIFARE
®
or LEGIC
®
transponders, the programming
station is always required to program the key. The programming station is
connected to the PC using a USB cable.
3.5.5 Special keys
Using the service key, a user identifies himself as an administrator of the locking
system. If this key is held in front of a locking system component, then the
respective component goes into service mode, where it is possible, for example,
to create or change authorisations, make settings or to read the event log.
A sub-service puts an already personalized locking unit into service mode. These
sub-service keys have authorization only for certain areas or for specific times (for
example, for a locking system with several houses and individual management).
Sub-service keys cannot be used to customise brand new locking units for the first
time. Only existing customised locking system units can be set to the service
mode. Service key
Sub-service keys