CX2172/4
T
ABLE OF CONTENTS
25
Place the plate cover of both the door handles on the base plate and
unscrew the locking screw at the bottom of the plate such that the plate sits
firmly.
Insert the locking screw from the bottom of the handle and tighten it.
Check the functionality and easy movement of the door handle with the door
open. The handle is already engaged when delivered.
When engaged, the catch of the lock should be completely inside the lock
casing when the latch is pressed down.
To operate the door handle, insert the battery and close the housing (see
chapter 7.2.17.2.1 Battery replacement). The electronic door handle
disengages only after the battery is inserted.
After holding up an authorized key for the first time, only the two upper LEDs
light up as an indication.
The long wide plate is mostly used in doors, where the holes are available for
a circular rosette in the lock casing. These holes are used to fix the base plate.
The holes have to be drilled in the door subsequently if required, as described
below. Other types of attachment depend on the various door designs and
are not explained here.
Insert the square pin of the electronic door handle into the square nut of the
lock.
Place the drilling template on the square pin, align horizontally and centre
punch the hole markings.
Long wide plate