CX2122/24/26
C
OMMISSIONING
15
5.2.4
Delete all keys
Hold the service key in front of the reading unit of the knob module. The
knob module enters the programming mode.
Keep presenting the service key until the knob module exits the programming
mode.
Within 60 seconds, return the knob module to the programming mode and
present the service key to the reading unit. In the meantime, the knob module
indicates success using short audible signals.
After the programming mode has been exited after 15 seconds, all keys have
been deleted.
5.3
Management with Keyng CX2530
The CX2530 Keyng software enables convenient and easy management of the
electronic locking system.
You will find more detailed information in the CX2530 Keyng documentation.
5.4
Changing the settings
The following settings can be adjusted using the CX2530 Keyng software:
Time
Enable/disable the event log
Locking time (defines how long the knob module remains connected after
scanning an authorized key).
Wakeup sensitivity
Radio response of the knob module (wake-on-radio mode)