Technical data
Sound channels:
3
Duration (total) of stored sounds: 40 seconds
Power input:
max. 0.1 A
Size:
15 x 25 x 5 mm
Delivery status
Intellisound modules are setup from the factory with the following configuration:
Special function f1 switches noise #3 (driving noise of the locomotive)
Special function f2 switches noise #2 (audio signal 2)
Special function f3 switches noise #4 (uncoupling or door warning / closing tone)
Special function f4 switches noise #1 (audio signal 1)
Special function f8 switches noise #8 (mute switching function)
Maximum volume
www.uhlenbrock.de
For the latest information regarding the Intellibox, dealers, list prices or additional information,
please visit our web site.
Declaration of guarantee
Each component is examined before distribution for proper operation. However, if a problem
should arise within the guarantee period of 2 years, then we will repair it for you free of charge
upon receipt of your sales invoice.
The warranty claim is void, if damage was caused by inappropriate treatment, use or modification.
For EU only: Please note that, according to EMV law, this component may be operated only within
vehicles which carry the CE designation.
The label names mentioned are registered trade marks that-respective companies.
Loading new sounds into the module
In order to load a new sound into the IntelliSound module, the module must be separated from
the locomotive decoder and be connected via the SUSI plug into the appropriate socket of the
InteIliSound load adapter (# 31 010).
The module has writing protection, which protects it
module against accidental overwriting. Before new sounds
can be loaded, this protection must be removed. To
accomplish this, the points illustrated in the accompanying
picture must be connected (jumpered) before the module
is attached to the InteIliSound load adapter. The operating
steps for changing / loading sounds are provided with the
InteIliSound load adapter. You can find a large selection
of different sounds on our web page: www.uhlenbrock.de.
