Uhlenbrock Elektronik 74 420, User Manual

Page: 4 / 4

Uhlenbrock Elektronik GmbH
Mercatorstr.6
D-46244 Bottrop
Made in Germany
Unsere Pluspunkte für Sie:
2 Jahre Garantie ab Kaufdatum
auf alle unsere Produkte.
Service
Bei einem eventuellen Defekt senden Sie bitte den Baustein
zusammen mit dem Kaufbeleg und einer kurzen Fehlerbeschreibung
unter Angabe der Decoderadresse zur Reparatur an uns zurück.
Hotline
Wenn Sie Fragen haben, wir sind für Sie da!
Ihr direkter Weg zum Techniker:
0 20 45 - 85 83 27
Mo - Di - Do - Fr von 14 bis 16 Uhr und Mi von 16 bis 18 Uhr
CV
1
2
3
4
5
6
7
8
17/18
29
Value
3
5
2
2
90
-
1
85
199
208
4
CV Table (Configuration Variables)
Description
Decoder short address
Minimum speed
Acceleration delay
1 = no delay, 255 = max. delay
Deceleration delay
1 = no delay, 255 = max. delay
Maximum speed
Not used
Decoder/software version number
Manufacturer id
for „Uhlenbrock Elektronik GmbH“
Long address
CV17 high byte (with top 2 bits = 1), CV18 low byte
Bit #5 of CV #29 tells whether the short (0) or the long (1) address is
active.
Decoder configuration (see chapter on decoder configuration)
Allowed range
1-127
1-31
1-255
1-255
1-95
-
-
-
-
-
0-255
Important
If a decoder does not react to drive/function commands after a programming operation, then it
is most probable that its address has been modified. Please read CV #1 in order to find out what
the (short) address is - of course, had the long address (CV #17/18) been enabled (by setting
Bit #5 of CV #29) then also those CV’s should be inspected, either directly or, in case of the
Intellibox and Fleischmann TwinCenter, by using the “long address” menu.
www.uhlenbrock.de
Be it most recent information about Intellibox, a pricelist or a listing of authorized dealers, plus
various publications to download, our website warrants your visit in every case.
Warranty Statement
Every item is fully tested for functioning before shipment. If a defect occurs within two years
after purchase, the item will be repaired free of charge against presentation of purchase proof.
Damages caused by overload or improper treatment are not covered by this warranty.
For EU only
Please note that decoders may only used in models carrying the EC conformance label.
Item no. 74 422
09.02 Be
4 033405 744220