C o p y r i g h t b y U h l - I n s t r u m e n t s M a n u a l
Page 10
Startup
Connecting the Power Cable:
Make sure the power switch (see page 7) 10is set to OFF before you connect the power cable at the X3.
Plug the power cable into a grounded outlet only.
The X3 runs on AC power: 100, 120, 230, or 240 volts at 50–60 Hz.
Audio Connections
Make sure your sound system is at a safe volume level. Also make sure that the X3’s
VOLUME knob (on the far left side of the front panel) is all the way down.
Plug in a pair of stereo headphones or run two standard 1/4‐inch instrument cables from the
MAIN outputs of the X3 to your amplifier or mixer for stereo. Use only one of the two outputs for mono.
AUDIO-Jacks:
The X3 features two pairs of audio jacks, MAIN-Out und AUX-Out ( see page 6). Thes are standard ¼ inch
jacks. The audio routing can be configured with the display/menu-panel (see page 20). The routing options
are outlined below:
Configuration
Main-OUT L
Main-OUT R
AUX L
AUX R
ORG/PD - L/R
Organ Plain
Pedal
Rotary Left
Rotary Right
PD/ORG - R/L
Pedal
Organ Plain
Rotary Right
Rotary Left
L/R - ORG/PD
Rotary Left
Rotary Right
Organ Plain
Pedal
R/L - PD/ORG
Rotary Right
Rotary Left
Pedal
Organ Plain
ORG/L - PD/R
Organ
Rotary Left
Pedal
Rotary Right
L/ORG - R/PD
Rotary Left
Organ Plain
Rotary Right
Pedal
PD/R - ORG/L
Pedal
Rotary Right
Organ Plain
Rotary Left
R/PD - L/ORG
Rotary Right
Pedal
Rotary Left
Organ Plain
AMP/PD - L/R
Organ AmpSim
Pedal
Rotary Left
Rotary Right
PD/AMP - R/L
Pedal
Organ AmpSim
Rotary Right
Rotary Left
L/R - AMP/PD
Rotary Left
Rotary Right
Organ AmpSim
Pedal
R/L - PD/AMP
Rotary Right
Rotary Left
Pedal
Organ AmpSim
AMP/L - PD/R
Organ AmpSim
Rotary Left
Pedal
Rotary Right
L/AMP - R/PD
Rotary Left
Organ AmpSim
Rotary Right
Pedal
PD/R - AMP/L
Pedal
Rotary Right
Organ AmpSim
Rotary Left
R/PD - L/AMP
Rotary Right
Pedal
Rotary Left
Organ AmpSim
L/R =
Rotary Cabinet Stereo-Simulation left/right , including Amp 122-Simulation (Overdrive)
ORG =
Pure Organ signal
AMP =
Organ-Signal with Amp 122-Simaltion (Overdrive) but without Rotary Effect
PD =
Bass-Pedal
MAIN-Out und AUX-Out jacks can be used with professional audio equipment like active speakers, mixers,
PA, multicore /DI-Boxes, rotary cabinets (1/4 –inch plugs) and other such audio devices.
