10
BT18/7
1 TECHNICAL CHARACTERI-
STICS
Specifications are subject to change without
notice.
2 INTRODUCTION
Thank you for choosing Ugolini.
Congratulation on choosing an Ugolini hot&cold
water dispenser!
You have selected a high quality, precision-
engineered appliance designed designed for your
convenience. Despite its sophistication, your new
Ugolini hot&cold water dispenser is amazingly
simple to operate because it has so many
automatic features. The cabinet has a Sliding Rail
System to make it easy to load fresh water
supplies without heavy lifting. Water bottles are
installed with the open-end up to eliminate
spilling. When in operation, the water bottle’s
open end is sealed to prevent contaminationfrom
the enviroment. Ugolini cools the water with a
semiconductor Refrigeration Unit that does not
harm the enviroment. When the bottle is empty,
the empty LED will start blinking and UGOLINI will
call you with a melody. The hot water reservoir is
made of stainless steel and designed without
welded joints. The Ugolini hot & cold water
d i s p e n s e r h a s b e e n d e s i g n e d f o r y o u r
convenience, taking safety, hygiene, and the
enviroment into consideration.
To take full advantage of all of the features and
benefits of this unique hot&cold water dispenser,
be sure to read this manual carefully and then
keep it in a safe place for future reference.
3 INSTALLATION
3. 1 TO OPERATE SAFELY
1
See if the following parts are included in
the package.
2
Maintain the sufficient distance (about
6-7inches, 15 cm.) between the wall and
back of BT 18/7.
3
And avoid contacting water dispenser
with direct sunlight, water and heating units
.
Room temperature should not exceed 90°F
BT 18/7
Dimensions:
width
cm
340
depth
cm
398
height
cm
1021
Net weight, approx.
kg
22
Hot water tank
l
2
Cold water tank
l
2
Adjustable thermostats
1
Noise level lower than 70 dB (A)
IMPORTANT
Read electrical ratings written on the data
plate of the individual units; the data plate
is adhered on the dispensing side panel of
the unit, just behind the drip tray (the right
side drip tray in multiple bowl models). The
serial number of the unit (preceded by the
symbol #) is adhered just below the right
bowl. Data plate specifications will always
supersede the information in this manual.