Ugo Vs 4.0, Instruction Manual

Page: 5 / 15

Troubleshooting your Bluetooth UGO Vs 4.0
PROBLEM: SOLUTION:
The speaker doesn’t play Turn the power button to ‘ON’ position.
Make sure the speaker is charged. If you
are not sure that the battery is charged
attach the charging cable to the UGO and
plug the other end into any active USB
port.
Make sure the volume of your device is
turned up. Make sure the volume on the
speaker is turned up.
Check to be sure the UGO is in the correct
MODE. Do this by pushing the MODE
button.
Make sure that the play/pause button is
not in pause position.
If connected wirelessly check status of the
device that is connected. Make sure that
the UGO is paired – connected and that
the media is playing.
Try pressing the Mode button to switch
modes.
Try turning the power Off then back On.
Your Micro SD card is inserted into the
UGO but the music doesn’t play.
Make sure the power button is in the ‘ON’
position.
Songs must be in MP3 format. If your
songs are in a different format go to the
trouble-shooting guide on our web site,
ugospeakers.com. Choose support for
MICRO SD card. There you will find
instructions that will help you reformat
your files to MP3.
Check that the battery is charged.
Try Pressing the Pause/ Play button.
Make sure SD card is inserted with
printing up and is pushed in until you
hear a click.
Try pressing the MODE button to be
certain you are in Micro SD mode.