Page 16
37370 Instruction Manual (Rev. 0)
5.7.3 Downloading
If the configuration is present, the user can
overwrite it with the current instrument pa-
rameters by depressing
F2 (SAV)
and
F1
(YES)
or create a new configuration file, by
depressing only and
F2 (SAV)
.
The caption
“
CONFIGURATION SAVED
”
con-
firms the overwriting.
5.7.4
From Memory Key to PC
With the memory key inserted in its slot on the PC, it is possible to import or export a
configuration to/from the memory key.
From the CUB software, select
D
ATA
/M
EM
S
TICK
>
L
OAD
C
ONFIG
or
S
AVE
C
ONFIG
.
5.7.5
From PC to Instrument
It is possible to send or read the current configuration directly from/to the instrument.
From the CUB software, select
D
ATA
/M
EM
S
TICK
>
R
EAD
C
ONFIG
or
W
RITE
C
ONFIG
.
6
OPERATING WITH MINI PRINTER AND PC
6.1
How to set the Data output to PC
The experimental data are saved in the instrument internal memory. During the experi-
mental trial, the data can also be routed to the PC for real-time or remote communication.
First of all, install the CUB Software, see paragraph 4.7. Then connect the cables as out-
lined in paragraph 4.6-Connections.
Open the CUB Program and select ‘
FILE
-
CONFIGURATION’
and the type of connection, se-
rial or USB (Help). It is not necessary to take any further action: the data are always rout-
ed to the PC (even when the PC is not connected).
USB and serial communication between the Plantar Test and the PC is managed by the
Ugo Basile CUB (or Win-DAS) software, see paragraph 3 and software manual.
6.2
How to set the Data output to MiniPrinter
The experimental data are saved in the instrument internal memory. During the experi-
mental trial, the data can also be printed-out in real time via the optional
57145
Thermal
MiniPrinter
, see paragraph 12.2.
Summary of Contents for 37370
Page 39: ......
