Installation
12
This device is provided by an universal input power system which accept 85-264
VAC, 50-60Hz and absorb a maximum of 15 Watt.
5.4. Intended Use
The Plethysmometer is intended for
Investigation use on laboratory animal only.
DO NOT USE ON HUMANS.
5.5. Additional Safety Consideration
1. Use original accessories and spare parts only.
2. Immediately disconnect and replace damaged main cord.
3. Do not obstruct access to the power module.
4. Do not operate in hazardous environment or outside prescribed environmental
limitation.
5. Do not spray any liquid on the connectors, display, or on the electronic unit.
Ugo Basile cannot in any way and form be held responsible for damage
caused to things and people and warranty will be void, due to:
• Incorrect electrical supply.
• Incorrect installation procedure.
• Incorrect or improper use or, in any case, not in accordance with the purpose
for which the instrument has been designed and the warnings stated in the
instruction manual supplied with the instrument.
• Replacement of original component, accessories or parts with others not made
by Ugo Basile.
• Servicing carried out by unauthorized personnel.
5.6. Connections
Connect the transducer cable connector to the electronic unit at the
sensor
connector, connect the pedal foot switch at the
pedal
connector.
Connect the mains cord between the power socket of the Plethysmometer and
the power outlet with a reliable earth connection, then turn ON the device.
Rear view of the Plethysmometer control unit
Summary of Contents for 37240
Page 3: ......
