INSTRUCTIONS FOR USE MINICAST
15
MELTING AND INJECTION
After installing your machine according to the instructions on page 9
- Press the ON/OFF key.
- Set the time-delay potentiometer
(roughly 1/4 turn above the minimum).
"
- Open the cover.
- Position the casting ring and adjust its height using the lever.
- Position the counterweight according to the size of the casting ring.
- Put the metal in the crucible.
- Position the crucible against the casting ring.
- Press the CYCLE key.
- Melt the alloy with the torch.
- When the alloy is ready to be injected, close down the cover which will make the motor
starts.
N.B. : The rotation way is counter clokwise.
1X
6X
3X
Stellites
9X
