Ugin 201221, Manual

Page: 4 / 9

Instructions for use (rev 201221) VACUUM PUMP
UGIN DENTAIRE 3
B. INSTRUCTIONS FOR USE
1. SAFETY INSTRUCTIONS
1.1.
USE
VACUUM PUMP is a hermetic group without oil bath, with non-return valve. It is recommended to be used
with UGIN DENTAIRE ceramic and pressing furnaces. This equipment has to be operated only by dental
professionals
.
VACUUM PUMP has to be used in the conditions and for the intended use in this manual . Any other use
that will be made of it is considered inappropriate. In this case, the manufacturer declines all liability and
immediately cancels the equipment warranty.
According to the pr
oduct’s instructions, it is imperative to read carefully the manual before furnace
installation and operations. Retain the manual for future reference.
1.2. SAFETY INSTRUCTIONS
Pictograms’ meaning used in these instructions for use:
General warning Electrical hazard Burn hazard - Hot surface
Observe following safety instructions:
-
The unit has to be connected to an electrical installation in accordance with the applicable
standard in the country in which it is being used. This installation has to provide protection
against overcurrent, overload and ground faults .
-
Connect it directly to socket . Do not use multiple sockets.
-
Ensure that the electric cord is in perfect condition to prevent short circuits.
-
Before any technical intervention , the unit has to be disconnected from the mains power
supply.
-
Do not spill liquid on the ventilation openings or inside the equipment.
-
During operation and after use, the vacuum pump surface may reach high temperatures: do
not touch.
-
This vacuum pump was designed to pumping non-aggressive gases containing oxygen less than
22%.
Use only with UGIN DENTAIRE ceramic and pressing furnaces.
-
Never use this pump to suck up corrosive liquids or water vapour.
-
Use only genuine spare parts . The use of non-original spare parts voids any warranty for your
device.
-
Do not introduce stranger objects inside the unit during the maintenance operations. It is
forbidden to modify the material without authorization.
-
Do not execute different operations of maintenance from those brought back in the manual.
Whichever operation not included in this manual, can involve risks.
-
For whichever information concerning installation, maintenance and use, contact the
customer’s service UGIN DENTAIRE.