Now the flight controller is ready to be connected via Onboard SDK. Default DJI App ID and
Key are used.
Important: The DJI A3 may not activate from the first attempt. If there is no connection with
flight controller after full system setup, try to repeat steps from 1 to 3 several times with DJI
A3 power cycling.
Option 2: Using user’s credentials
Otherwise, one may use his own credentials while DJI A3 activating. In this case, follow steps
described below.
Step 1. Follow the steps from 1 to 6 from the previous section but using own DJI credentials.
Step 2. Create an account on
then enter to Apps tab in developer
area.
Step 3. Choose ONBOARD SDK and press CREATE APP.
Figure 5•6 — DJI Developer area
Step 4. Enter correspondent information and press CREATE.
Setup Interface to DJI A3
Data Logger User Manual
Copyright © 2019—2020, SPH Engineering
27
Revision 2 • January 2020