UFREE SCOOTER www.scooter-manufacturer.com
3
ADJUSTMENTS AND OPERATION
UNFOLDING AND
FOLDING
Your scooter is shipped in
the folded and locked
position. To unfold press
snap pins and lift the Quick
Release Handle and the
opposite side. Adjustable
Spring Loaded Handle (fig.
2). Turn the Spring Loaded
Handle. This will allow you
to lift the Handlebars to the
upright position. Lock the
Spring Loaded Handle into
the small round Guide Hole.
Be sure that snap pins fit
into Clamp down the Quick
Release Handle. Check for a
secure lock. Reverse this
procedure to fold. There is
Tightness control Adjustment
Nut on the Spring Loaded
Handle.
FIG. 2
HANDLEBARS
Insert Grips into Handlebar
T-Frame as shown in fig 3.Be
sure that Snap Pins fit into,
and lock the small holes in the
top of the T-Frame. With the
handlebars in the upright &
locked position, and the rider
standing on the platform with
ONE HAND ON THE
BRAKE,
adjust the Handlebar
height to just below the rider's
waistline. This is
accomplished by loosening
the Height adjuster (fig. 3)
while holding onto the
handlebars ...move the
handlebars to the desired
height and tighten Height
Adjuster. Be sure Height
Adjuster is tight.
FIG.3
ADJUSTMENT
LIFT
QUICK
RELEASE
HANDLE
SNAP PINS
HANDLE SWITCH
HANDLEBRAK
GRIPS
HANDLE SWITCH
