UFREE SCOOTER www.scooter-manufacturer.com
4
4.1.3 Assemble the handle bar, put the accelerator correct location, fix it
with hex spanner. (Figure 3)
4.2
Assemble the saddle pipe, adjust and tighten. (Figure 4)
4.3
Adjust the rear brake
4.3.1
Adjust the rear adjusting bolt, tighten the brake bar to insure rear
wheel not turning, loose the brake bar, rear wheel turning freely.
(Figure 5)
4.3.2
If brake shoe (brake rubber) wear-tear too much, please replace it in
time.
4.4 Front wheel assembly, maintenance and service.
4.4.1 Loose the front shaft nut, remove the special washer to the hole
(O6.5), tighten front shaft nut, insure the front wheel in correct
location. (Figure 6)
4.5 Adjust
the
chain
4.5.1
Loose the rear shaft nut.
4.5.2
Loose the bolts on both sides, move the rear wheel backside, adjust
and make the chain running freely, tighten rear shaft nut. (Figure 7)
4.6 Assembly the rear wheel
4.6.1
Loose the rear shaft nut, put off the chain, take out the rear wheel.
4.6.2
Put the chain, adjust the bolts on both sides, finally, tighten the rear
shaft nut. (Figure 8)
5. Maintenance and service
5.1Daily inspection and service
Summary of Contents for FS-E11
Page 1: ...UFREE SCOOTER www scooter manufacturer com ELECTRICSCOOTERFS E11...
Page 9: ...UFREE SCOOTER www scooter manufacturer com 8...
Page 10: ...UFREE SCOOTER www scooter manufacturer com 9 E SCOOTER Figure 2 Figure 3 Figure 5 Figure 4...
Page 11: ...UFREE SCOOTER www scooter manufacturer com 10 E SCOOTER Figure 6 Figure 7 Figure 8...
