Universal Fiber Optic Lighting
19
DMX OPERATION – DECORATIVE TWINKLE WHEEL CONTROL SENSOR
For DMX wheel control DIP switch 10 must be OFF and the XLR plug(s) must
be plugged into the XLR sockets on the side panel.
The Illuminator decorative wheel can be controlled on DMX channel 2 as
shown in the following DMX table.
NOTE:
for this configuration of a twinkle wheel with sensor, the wheel is
supplied with a cut out segment. The wheel in motion will give an
uninterrupted twinkle by rotating backwards and forwards either side of the
segment. When 0V is selected the wheel will come to rest at the segment
giving unobstructed white light output.
DMX OPERATION – LED / FAN CONTROL
For DMX LED and fan control, switch 10 must be OFF and the XLR plug(s) must
be plugged into the XLR sockets on the side panel.
The Illuminator LED and Fan can be controlled on DMX channel 3 as shown in
the following DMX table.
Channel
Function
Value
Description
1
Dimming
0-255
From off at 0 to brightest at 255
2
Twinkle wheel
0
Wheel at stop at cut out segment giving
full white light
2
Twinkle wheel
1-255
Varying baxkwards and forward rotation
from very slow to 7.5rpm at maximum
3
LED & fan
0-250
LED & fan on
3
LED & fan
251-255
LED & fan off
SIRIUS DMX CHANNELS - TABLE 3
Each Sirius occupies 3 DMX channels as detailed below.
