UFO MicroLED 3000, Product User Manual

Page: 8 / 16

Once the Light Source is fully installed carry out a complete range walk test and record the range in
the table below. This information is essential for maintenance purposes to determine if the
range/sensitivity is reducing and also to record dead areas within the Remote Controller’s range
due to RF obstructions and/or RF interference.
NOTE :
Where a Light Source has more than one Remote Control, reduction in operating range may
be experienced when both (or multiple) Remote Controls are used simultaneously.
REMOTE RANGE WALK TEST
Description Date Max Range
Controller 1
Controller 2
Controller 3
Dead Areas
To disable the remote and revert to manual operation press one of the buttons on the rear of the
Light Source. The Light Source will now respond to manual commands from the 2 control buttons
as detailed below.
The LED Light source has 2 colour cycles each with 3 different speed settings as detailed below.
STANDALONE OPERATION
OPERATION
Cycle Colour 1 Colour 2 Colour 3 Colour 4 Colour 5 Colour 6 Colour 7
1 White Red Orange Jade Green Cyan Blue
2 Red Orange Jade Green Cyan Blue White
OPERATION
MICROLED
3000
USER GUIDE
8