Mic100PT V2 Light Source
6
TROUBLESHOOTING
Problem
Probable cause(s)
Remedy
Unit is dead - LED power
indicator is not
illuminated
Mains supply off
Check supply and reinstate
Loose mains plugs
Check plugs
PSU failed
Replace PSU
Unit is dead - no light
output but LED power
indicator is still
illuminated
LED array failure
Replace LED unit
Unit is not twinkling
Motor speed push button
at stop
Press button to start motor
Twinkle wheel motor failure Replace Unit
Poor light output on fibre
Dimming push button at
minimum
Press button to increase
brightness
Unit needs cleaning
Carefully clean LED Lens
with dry cloth
Clean fibre common end
Fibre port connector not
plugged in correctly
Ensure plugged in correctly
and secured with locking
screw
