UFO Luna C 0-10V / UFO, Product User Manual

Page: 6 / 16

USING THE ILLUMINATOR
-
LUNA CM
,
MCM
,
TM AND MTM MODELS ONLY
The Luna CM & Luna TM has either manual control of the dimming or manual control of the
speed of the decorative wheel motor.
For a Luna CM or TM with only manual control of the decorative wheel - the motor speed can be
adjusted using the control on the rear of the unit from approximately 0.6 rpm to 3.75 rpm.
For a LunaCM or TM with only manual control of the light output – the output can be adjusted
using the control on the rear of the unit from no light output to maximum light output. In this
mode, the speed of the decorative motor is fixed, but controlled by a wire link between 10V and
SPD screw terminals on the PCB (see image on following page). With the link in place the speed is
fixed at 3.75 rpm. With the link removed the speed is fixed at 0.6 rpm.
Model Descrip ti on
UFO Luna CM
Either manual dimming with fi xed color wheel speed or fi xed light
output with manual color wheel speed control*
UFO Luna TM
Either manual dimming with fi xed twinkle wheel speed or fi xed light
output with manual twinkle wheel speed control*
UFO Luna MCM Manual dimming & manual color wheel speed control
UFO Luna MTM Manual dimming & manual twinkle wheel speed control
*Fixed wheel speed can be either 0.6 rpm or 3.75 rpm depending on link ­ see text below
OPERATION
LUNA USER GUIDE
6