7
Operating the Fan
7
Note:
After a period of running the mist spray, there will be little water around the
orifice of mist spray, it is normal phenomenon, you may clean it by yourself.
6.
Press
“COOLER”
button, the indicator light is on, the water pump starts running,
it cycles the water through water screen to blow cool air and get temperature cool
down quickly.
7.
Press
"TIMER"
button on the remote control to set the fan running time between
0.5 - 7.5 hours and switches the fan off after preset time. There are 4 indicator
lights of automatic timing. To set a time of 0.5 hours you need to press the button
once and to set 7.5 hours of running time you need to press 15 times and all the 4
indicator lights get shining.
8.
Press
"ION"
button on the remote control, the indicator light is on, the negative
ions generated by the ionizer emanate from the unit throughout the room and cause
dust, pollen, mold spores, pet dander, etc. to clump together and drop out of the air.
“ION”
button can be used separately, or worked together with the air cooler.
9.
Press
"OFF"
button, it switches off the fan and all fan functions return to original
state. However, independent operation buttons are available.
10.
Remote Control should be aimed to the infrared port when it is used. If the
remote control doesn’t work well, please first check the inside battery, and change
new batteries if needed.
Note:
Change the batteries with new and same types. Otherwise your remote control
may not operate properly. Remove the batteries out of the remote control if you
won’t use it for a long time. Remaining batteries may damage your remote control.
Summary of Contents for ATEAC-01
Page 2: ......
Page 31: ...Notlar Notes 03 02 11 R0...
