UFESA DL3000 ELEGANCE COMPACT, Instruction Manual

Page: 30 / 98

30
gel on the skin to avoid damage to the device.
Gear function: press the power switch gear. After 100 times of
use, standby for 1 minute before use. In automatic light mode, for
better use effect, please use after 100 times, standby for 1 minute
before use.
Try not to take any photosensitive food (such us spinach, rape,
mustard, etc.) during operation.
Adjust energy levels from weak to strong, within the extent of
not damaging the skin, the higher the energy is, the better effect
will be.
People with darker skin may have delayed skin reactions. Do not
increase energy if an immediate response is not distinctive.
Pay attention to skin hydrating and sunscreen after flashing.
Avoid UV radiation during using the device, be prepared for sun
shading, avoid computer radiation and apply sun cream for pro-
tection.
During use, do not block air inlet, vent and cooling holes to avoid
heat dissipation issues.
If any hair or stain stuck on the plastic around the edge of the lens
during use, it may cause the plastic to turn black or black spots,
however this will be no affect to performance and normal use of
the device.
In the later stage of specified life period of the lighting tube,
which is located inside the lighting lens area, there can be diffe-
rent degrees of blackening on the tube’s inner wall. As it is a nor-
mal aging process of the tube, the attenuation rate of energy will
not exceed specified scope during its lifespan, so it can be used
normally.
The product is not waterproof.
Avoid storage in places where there is strong magnetic fields,
high humidity, dust or high temperature.