UFESA CP6850 UNDERCUT, Instruction Manual

Page: 22 / 68

22
MAINTENANCE AND CLEANING
Unplug the product when you do not intend to use it for an ex-
tended period of time to prolong its shelf-life. Allow the device
to cool down prior to storage. Separate the cutting head (6) from
the body and use the cleaning brush (8) to remove dust from the
internal parts.
Apply a drop of oil (9) on one of the edges of the blades for their
maintenance, and turn on the device for a few seconds to distri-
bute it. This should be done when you notice a certain amount of
difficulty during the trimming operation.
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical
products must never be used for the same.
PRODUCT DISPOSAL
This product complies with European Directive
2012/19/ EU on electrical and electronic devices,
known as WEEE (Waste Electrical and Electronic Equi-
pment), provides the legal framework applicable in
the European Union for the disposal and reuse of was-
te electronic and electrical devices. Do not dispose of
this product in the bin, instead going to the electrical
and electronic waste collection center closest to your
home. The product may contain batteries. Remove
them before disposing of the product and dispose in
special containers approved for this purpose.
We hope that you will be satisfied with this product.