UFESA AE4829 valley, Instruction Manual

Page: 23 / 76

Cleaning the brush roll:
1. Remove the brush roller from the brush housing. Slide the brush roller fastener “A” away from the
brush as below.
2. Carefully clean and remove the hairs and debris from the brush roller. Wipe to clean only, do not use
any soap or harsh cleaning solvents.
3. If brush roller becomes damp, allow to dry naturally before replacing.
4. Slide fastener “A” to original position to secure the brush roller.
Step 6
Installation of battery pack and charging (Step 1)
When the vacuum cleaner power is insufficient, please promptly charge the vacuum cleaner. The
device can be charged in 2 different ways. It can be charged directly through the handheld vacuum
cleaner (the three lights on the back of the body will indicate the state of the battery) or the battery can
be removed and charged separately. Please remember to charge the battery after each cleaning
session or when the battery is low.
23