5
*To save power, the logger’s LED flashing-cycle can be changed to 20 or
30 seconds via the supplied software.
**To save power alarm LED’s for temperature and humidity can be
disabled via the supplied software.
***When both temperature and relative humidity readings exceed the
alarm levels the LED status indication alternate every cycle. For example if
there is only one alarm cycle the “
REC
” LED will blink for one cycle, and
the Alarm LED status will blink on the next cycle. If there are two alarms
the “
REC
” LED will be disabled and the two alarms will alternate on each
cycle.
****When the battery is low all operations will be disabled automatically.
NOTE:
Logging will automatically stop if the battery level is low (logged
data will be retained). The software is required to download data and
restart logging.
*****To delay logger start, use the software and select “
MANUAL
”
instead of “
INSTANT
”. This is available from the “
LINK
” menu and
then “
LOGGER SET
”, or by clicking on the computer icon on the Logger
Software task bar. If you select “
MANUAL
” the logger will not begin
logging until you press the yellow button on the logger housing.
www.
.com
1.800.561.8187
