UEi PowerDAQ PD2-AO Series, User Manual

Page: 21 / 69

Chapter 2: Installation and Configuration
13
Accessories
PowerDAQ AO boards have an extensive range of optional
accessories:
Cables (3ft, 6ft or 9ft)
Screw terminal panels
Complete kits
J1 high-density analog cable (PD2-AO-8[16][32] only)
J2 PD-CBL-37 DIO connection kit (PD2-AO only)
J3-J8 IDC40 to DB37 flat/twisted pair ribbon cable (PD2-
AO-96 only)
J1 to J1/J2 splitter analog/digital cable
Cables
Digital cable (PD2-AO boards only)
PD-CBL-37:
The J2 connector uses a 37-way ribbon
connector set. It comprises of a 13” internal
ribbon cable, which connects from the
PowerDAQ AO board J2 internal digital
connector (DIO /Counters/IRQs) to a 37-way
D-SUB bracket. A 1-meter ribbon cable then
connects from the bracket to the PD2-AO-
STP accessory panels.
Analog cable (PD2-AO-8[16][32] boards only)
PD-CBL-96:
The J1 connector uses a 96-way shielded
round 1-meter cable with a metal connector
on either end. It connects to: PD2-AO-STP-
16or 32, PD-BNC-16 or 64 accessory panels.